Display Install Which - H3C S5830V2 Command Reference Manual

Related commands
•
install rollback
•
reset install rollback oldest

display install which

Use display install which to display all software image files that include a specific component or
file.
Syntax
display install which { component name | file filename } [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
component name: Specifies a component name.
file filename: Specifies a file name, a case-insensitive string of up to 63 characters. It cannot contain
path information.
slot slot-number: Specifies an IRF member device by its member ID or specifies a PEX that has
storage media by its virtual slot number. On an IRF fabric, this command displays information for all
member devices if you do not specify a member device. On an IRF 3 system, this command displays
information for all parent devices and all PEXs with storage media if you do not specify a parent
device or PEX.
Usage guidelines
A component is a collection of features. The features of a component are installed or uninstalled at
the same time.
When the system displays a component or file error, use this command to identify the relevant image
files before you make a software upgrade decision.
This command searches only the root directory of the storage medium.
Examples
# Display all software image files that include file sshc.cli.
<Sysname> display install which file sshc.cli
File sshc.cli is in following packages on slot 1:
flash:/system-1330.bin
[Package]
Vendor: xxx
Product: xxxx
Service name: ssh
Platform version: 7.1.022
Product version: Beta 1330
Supported board: mpu
For more information about the command output, see Table 23.
175