Display Startup - H3C S5830V2 Command Reference Manual

domain default enable system
#
vlan 1
#
domain system
#
---- More ----
Related commands
•
reset saved-configuration
•
save

display startup

Use display startup to display the names of the current startup configuration file and the
next-startup configuration files.
Syntax
display startup
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
Current startup configuration file is the configuration file that has been loaded. Next-startup
configuration file is the configuration file used at the next startup.
All IRF members use the same current startup configuration file as the master. After a
master/subordinate switchover, it is normal that the current startup configuration files on them are
displayed as NULL. This is because the new master continues to run with the running configuration
rather than rebooting with a startup configuration file.
Examples
# Display names of the startup configuration files.
<Sysname> display startup
MainBoard:
Current startup saved-configuration file: flash:/startup.cfg
Next main startup saved-configuration file: flash:/startup.cfg
Next backup startup saved-configuration file: NULL
Slot 1:
Current startup saved-configuration file: flash:/startup.cfg
Next main startup saved-configuration file: flash:/startup.cfg
Next backup startup saved-configuration file: NULL
Table 20 Command output
Field
MainBoard
Description
Displays the startup configuration files on the master device.
148