License Compress - H3C S5830V2 Command Reference Manual

Use this command to revoke an unexpired license if you want to transfer the license from one device
to another.
If an activation file is uninstalled, the system creates an Uninstall key. Use this key together with the
SN and DID of the transfer destination to register the license for the transfer destination.
Trial licenses are not transferrable. When you uninstall the activation file of a trial license, no
Uninstall file is created.
Examples
# Uninstall the activation file flash:\license\20110812.ak from IRF member device 2.
<Sysname> system-view
[Sysname] license activation-file uninstall flash:\license\20110812.ak slot 2
This operation might take some time. Do not perform any other operations until the operation
is completed or a failure message is displayed. Please wait...
Uninstall file: flash:\license\20110812.uak
Related commands
•
display license activation-file
•
license activation-file install

license compress

Use license compress to compress the license storage.
Syntax
license compress slot slot-number
Views
System view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies the member ID of an IRF member device.
Usage guidelines
CAUTION:
The DID changes each time the license storage is compressed. Before performing a compression,
make sure all activation files generated based on the old DID have been installed. They cannot be
installed after the compression.
Use this command if the free license storage (see the display license feature command) is not
sufficient.
This command clears invalid licenses (expired licenses and uninstalled licenses) from the license
storage area.
Examples
# Compress the license storage on IRF member device 2.
<Sysname> system-view
[Sysname] license compress slot 2
This command will delete all data relevant to uninstalled and expired keys/licenses,
including Uninstall keys, and create a new device ID for activation keys/files. Make sure
284