Field
Connector Type
Wavelength(nm)
Transfer Distance(xx)
Digital Diagnostic
Monitoring
Ordering Name
display transceiver manuinfo
Use display transceiver manuinfo to display electronic label information for transceiver modules.
Syntax
display transceiver manuinfo interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface [ interface-type interface-number ]: Specifies an interface by its type and number. If no
interface is specified, this command displays electronic label information for the transceiver modules
on all interfaces.
Usage guidelines
This command displays only part of the electronic label information.
Examples
# Display the electronic label information for the transceiver module in interface Ten-GigabitEthernet
1/0/4.
<Sysname> display transceiver manuinfo interface ten-gigabitethernet 1/0/4
Ten-GigabitEthernet1/0/4 transceiver manufacture information:
Description
Connector type options:
MPO—Multi-fiber Push On.
•
LC—1.25 mm/RJ-45 fiber connector developed by Lucent.
•
•
RJ-45.
•
Fiber transceiver: Central wavelength (in nm) of the transmit laser. If the
transceiver supports multiple wavelengths, every two wavelength values are
separated by a comma.
•
Copper cable: Displayed as N/A.
Transfer distance, with "xx" representing the distance unit: km (kilometers) for
single-mode transceiver modules and m (meters) for other transceiver modules.
If the transceiver module supports multiple transfer media, the transfer distances
are separated by commas. The transfer medium is included in the bracket
following the transfer distance value. The following are the transfer media:
9 um—9/125 um single-mode fiber.
•
•
50 um—50/125 um multi-mode fiber.
62.5 um—62.5/125 um multi-mode fiber.
•
TP—Twisted pair.
•
•
CX4—CX4 cable.
Support for digital diagnosis:
YES—Supported.
•
NO—Not supported.
•
Product code.
251