Password-Recovery Enable; Reboot - H3C S5830V2 Command Reference Manual

[Sysname] monitor cpu-usage threshold 80
Related commands
•
display cpu-usage
•
display cpu-usage configuration
•
display cpu-usage history
•
monitor cpu-usage enable
•
monitor cpu-usage interval

password-recovery enable

Use password-recovery enable to enable password recovery capability.
Use undo password-recovery enable to disable password recovery capability.
Syntax
password-recovery enable
undo password-recovery enable
Default
Password recovery capability is enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Password recovery capability controls console user access to the device configuration and SDRAM
from Boot ROM menus.
If password recovery capability is enabled, a console user can access the device configuration
without authentication to configure new passwords.
If password recovery capability is disabled, console users must restore the factory-default
configuration before they can configure new passwords. Restoring the factory-default configuration
deletes the next-startup configuration files.
To enhance system security, disable password recovery capability.
Availability of Boot ROM menu options varies by the password recovery capability setting. For more
information, see the release notes.
Examples
# Disable password recovery capability.
<Sysname> system-view
[Sysname] undo password-recovery enable

reboot

Use reboot to reboot an IRF member device, PEX or all devices.
Syntax
reboot [ slot slot-number ] [ force ]
260