Display Device Manuinfo - H3C S5830V2 Command Reference Manual

Predefined user roles
network-admin
network-operator
Parameters
flash: Specifies the flash memory.
usb: Specifies the device connected to the USB interface.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot
number. If you do not specify this option on an IRF fabric, the command displays the device
information for all member devices. If you do not specify this option on an IRF 3 system, the
command displays the device information for all parent devices and PEXs.
subslot subslot-number: Specifies a subcard by its subslot number. The switch does not support
subcards.
verbose: Displays detailed hardware information. Without this keyword, the command displays brief
information.
Examples
# Display device information for all IRF member devices and PEXs in the IRF fabric.
<Sysname> display device
Slot Type
1 S5820V2-52QF
Table 36 Command output
Field
Slot x
Type
State
Subslot
Soft Ver
Patch Ver

display device manuinfo

Use display device manuinfo to display the electronic label information for the device.
Syntax
display device manuinfo [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot
number. If you do not specify this option on an IRF fabric, the command displays electronic label
State Subslot
Master 0
Description
ID of the IRF member device or PEX.
Type of the switch.
Status of the switch.
Subslot number of the subcard. The switch does not support subcards.
Software version.
Patch version.
234
Soft Ver
S5820V2-2422
Patch Ver
None