Display Transceiver Manuinfo Interface - H3C S9500 Series Command Manual

Command Manual – Ethernet Interface
H3C S9500 Series Routing Switches

1.1.13 display transceiver manuinfo interface

Syntax
display transceiver manuinfo interface [ interface-type interface-number ]
View
Any view
Default Level
1: Monitor level
Parameters
interface-type interface-number: Interface type and interface number.
Description
Use the display transceiver manuinfo interface command to display the radio
frequency identification (RFID) information of pluggable optical modules.
If an interface is specified, the system only displays the RFID information of the
pluggable optical module of the interface. If no interface is specified, the system
displays the RFID information of all pluggable optical modules.
Examples
# Display the RFID information of the pluggable optical module of GigabitEthernet
1/1/1.
<H3C> display transceiver manuinfo interface GigabitEthernet 1/1/1
GigabitEthernet1/1/1 transceiver manufacture information:
Manu. Serial Number
Manufacturing Date
Vendor Name
Table 1-11 Description on the fields of the display transceiver manuinfo interface
command
Manu. Serial
Number
Manufacturing Date
Vendor Name
: 213410A0000054000251
: 2007-04-01
: H3C
Field
Serial number generated during module test. The
information is stored in the RFID.
H3C module test date. The information is stored in the RFID.
The specified vendor name for the module. The information
is stored in the RFID.
Chapter 1 Ethernet Interface Configuration Commands
Description
1-21