Logging In To The Device - H3C S1600V2 Series Web Configuration Manual

Logging in to the device

NOTE:
As a best practice, use the following Web browsers:
• Google Chrome 109.0.5414.120 or higher.
• Mozilla Firefox 110.0 or higher.
• Microsoft Edge 89.0.774.68 or higher.
Internet Explorer Web browsers are not supported in the current software version.
1. Connect the PC to the LAN port on the device.
2. Assign an IP address in the 192.168.0.233/24 network for the PC.
3. Check whether the PC is enabled with the proxy service. If the PC uses a proxy server to
access the Internet, disable the proxy service.
4. Open the browser, enter
192.168.0.233 is the default management IP address of the device, and you can edit the
address after login.
5. On the login page, enter the default username (admin) and password (admin), and then click
Log In. As a best practice, change the login password immediately after the first successful
login for security purposes. For configuration procedures, see "Account."
Figure 1 Web login page
http://192.168.0.233 in the address bar, and then press Enter.
1