Table of Contents
Advertisement
The specified network must be available and active in the local IP routing table.
To inject a local network (IPv4 unicast/multicast address family):
Step
1.
Enter system view.
2.
Enter BGP IPv4 unicast
address family view,
BGP-VPN IPv4 unicast
address family view, or BGP
IPv4 multicast address family
view.
3.
Configure BGP to advertise a
local network.
To inject a local network (IPv6 unicast/multicast address family):
Step
1.
Enter system view.
Command
system-view
•
Enter BGP IPv4 unicast
address family view:
a. bgp as-number
[ instance
instance-name ]
b. address-family ipv4
[ unicast ]
•
Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
[ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
•
Enter BGP IPv4 multicast
address family view:
f. bgp as-number
[ instance
instance-name ]
g. address-family ipv4
multicast
network ipv4-address
[ mask-length | mask ]
[ route-policy route-policy-name ]
Command
system-view
229
Remarks
N/A
N/A
By default, BGP does not
advertise local networks.
Remarks
N/A
Advertisement
Table of Contents
Troubleshooting
