Routing Policy Configuration Examples; Routing Policy Configuration Example For Ipv4 Route Redistribution - HP HPE FlexNetwork 7500 series Configuration Manual

Task
Display BGP AS path list information.
Display BGP community list
information.
Display BGP extended community list
information.
Display IPv4 prefix list statistics.
Display IPv6 prefix list statistics.
Display MAC list statistics.
Display routing policy information.
Clear IPv4 prefix list statistics.
Clear IPv6 prefix list statistics.
Clear MAC list statistics.

Routing policy configuration examples

Routing policy configuration example for IPv4 route
redistribution
Network requirements
As shown in
with Switch C by using IS-IS.
On Switch B, enable route redistribution from IS-IS to OSPF. Use a routing policy to set the cost of
route 172.17.1.0/24 to 100 and the tag of route 172.17.2.0/24 to 20.
Figure 117 Network diagram
OSPF
Switch A
Configuration procedure
1. Specify IP addresses for interfaces. (Details not shown.)
2. Configure IS-IS:
# Configure Switch C.
<SwitchC> system-view
Figure 117, Switch B exchanges routing information with Switch A by using OSPF and
Vlan-int100
Vlan-int200
192.168.1.2/24
192.168.2.2/24
Switch B
Vlan-int100
192.168.1.1/24
192.168.2.1/24
Command
display ip as-path [ as-path-number ]
display ip community-list [ basic-community-list-number |
adv-community-list-number | name comm-list-name ]
display ip extcommunity-list [ ext-comm-list-number ]
display ip prefix-list [ name prefix-list-name ]
display ipv6 prefix-list [ name prefix-list-name ]
display mac-list [ name mac-list-name ]
display route-policy [ name route-policy-name ]
reset ip prefix-list [ prefix-list-name ]
reset ipv6 prefix-list [ prefix-list-name ]
reset mac-list [ mac-list-name ]
IS-IS
Vlan-int200
Switch C
510
Vlan-int201
172.17.1.1/24
Vlan-int202
172.17.2.1/24
Vlan-int203
172.17.3.1/24