Displaying And Maintaining Multicast Routing And Forwarding - HP 6125XLG Configuration Manual

address entries to bind multicast MAC addresses and ports to control the destination ports of the multicast
data.
When you configure static multicast MAC address entries, follow these guidelines:
You can configure static multicast MAC address entries on the specified interface in system view, or
•
on the current interface in interface view.
The multicast MAC address that can be manually configured in the multicast MAC address entry
•
must be unused. (A multicast MAC address is a MAC address of which the least significant bit in the
most significant octet is 1.)
To configure a static multicast MAC address entry in system view:
Step
1. Enter system view.
2. Configure a static multicast
MAC address entry.
To configure a static multicast MAC address entry in interface view:
Step
1. Enter system view.
2. Enter Ethernet interface/aggregate
interface view.
3. Configure a static multicast MAC
address entry.
Displaying and maintaining multicast routing and
forwarding
CAUTION:
The reset commands might cause multicast data transmission failures.
Execute display commands in any view and reset commands in user view.
Task
Display information about
static multicast MAC
address table.
Display multicast boundary
information.
Command
system-view
mac-address multicast
mac-address interface interface-list
vlan vlan-id
Command
system-view
interface interface-type
interface-number
mac-address multicast
mac-address vlan vlan-id
Command
display mac-address [ mac-address [ vlan vlan-id ] | [ multicast ] [ vlan vlan-id ]
[ count ] ]
display multicast boundary [ group-address [ mask-length | mask ] ] [ interface
interface-type interface-number ]
39
Remarks
N/A
By default, no static multicast MAC
address entries exist.
Remarks
N/A
N/A
By default, no static multicast
MAC address entries exist.