HP HPE FlexNetwork 7500 series Configuration Manual page 70

[SwitchB-rip-1] network 192.168.3.0
[SwitchB-rip-1] quit
# Configure Switch C.
<SwitchC> system-view
[SwitchC] rip 1
[SwitchC-rip-1] network 192.168.3.0
[SwitchC-rip-1] import-route static cost 3
[SwitchC-rip-1] quit
3. Configure BFD parameters on VLAN-interface 100 of Switch A.
[SwitchA] bfd echo-source-ip 11.11.11.11
[SwitchA] interface vlan-interface 100
[SwitchA-Vlan-interface100] bfd min-echo-receive-interval 500
[SwitchA-Vlan-interface100] return
4. Configure static routes:
# Configure a static route on Switch A.
[SwitchA] ip route-static 100.1.1.0 24 null 0
# Configure a static route on Switch C.
[SwitchA] ip route-static 100.1.1.0 24 null 0
Verifying the configuration
# Display BFD session information on Switch A.
<SwitchA> display bfd session
Total Session Num: 1
IPv4 session working under Echo mode:
LD
3
# Display routes destined for 100.1.1.0/24 on Switch B.
<SwitchB> display ip routing-table 100.1.1.0 24 verbose
Summary Count : 1
Destination: 100.1.1.0/24
Protocol: RIP
Process ID: 1
SubProtID: 0x1
Cost: 1
IpPre: N/A
Tag: 0
OrigTblID: 0x0
TableID: 0x2
NibID: 0x12000002
AttrID: 0xffffffff
Flags: 0x1008c
Label: NULL
BkLabel: NULL
Up Session Num: 1
SourceAddr DestAddr
192.168.2.1 192.168.2.2
Preference: 100
QosLocalID: N/A
OrigVrf: default-vrf
OrigAs: 0
LastAs: 0
Neighbor: 192.168.2.1
OrigNextHop: 192.168.2.1
RealNextHop: 192.168.2.1
BkNextHop: N/A
Init Mode: Active
State
Up
Age: 00h02m47s
State: Active Adv
58
Holdtime Interface
2000ms vlan100