HP HPE FlexNetwork 7500 series Configuration Manual page 245

Step
1. Enter system view.
2. Enter BGP IPv4 unicast
address family view,
BGP-VPN IPv4 unicast
address family view, or BGP
IPv4 multicast address family
view.
3. Configure automatic route
summarization.
Configuring manual route summarization
By configuring manual route summarization, you can do the following:
•
Summarize both redistributed routes and routes injected using the network command.
•
Determine the mask length for a summary route.
To configure BGP manual route summarization (IPv4 unicast/multicast address family):
Step
1. Enter system view.
Command
system-view
•
Enter BGP IPv4 unicast
address family view:
a. bgp as-number
[ instance
instance-name ]
b. address-family ipv4
[ unicast ]
•
Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
[ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
•
Enter BGP IPv4 multicast
address family view:
f. bgp as-number
[ instance
instance-name ]
g. address-family ipv4
multicast
summary automatic
Command
system-view
233
Remarks
N/A
N/A
By default, automatic route
summarization is not configured.
Remarks
N/A