HP HPE FlexNetwork 7500 series Configuration Manual page 252

Step
1. Enter system view.
2. Enter BGP IPv4 unicast
address family view,
BGP-VPN IPv4 unicast
address family view, or BGP
IPv4 multicast address family
view.
3. Specify the maximum
number of routes that a
router can receive from a
peer or peer group.
To limit routes that a router can receive from a peer or peer group (IPv6 unicast/multicast address
family):
Step
1. Enter system view.
Command
system-view
•
Enter BGP IPv4 unicast
address family view:
a. bgp as-number
[ instance
instance-name ]
b. address-family ipv4
[ unicast ]
•
Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
[ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
•
Enter BGP IPv4 multicast
address family view:
f. bgp as-number
[ instance
instance-name ]
g. address-family ipv4
multicast
peer { group-name | ipv4-address
[ mask-length ] } route-limit
prefix-number [ { alert-only |
discard | reconnect
reconnect-time } |
percentage-value ] *
Command
system-view
240
Remarks
N/A
N/A
By default, the number of routes
that a router can receive from a
peer or peer group is not limited.
Remarks
N/A