Displaying And Maintaining Fc Routing And Forwarding - HP FlexFabric 5700 Series Configuration Manual

An active/standby switchover.
•
GR involves the following roles:
GR restarter—GR-capable device where a protocol restart or active/standby switchover occurs.
•
GR helper—The GR restarter's neighboring device that assists in the GR process.
•
Configuring the GR restarter
Step
1. Enter system view.
2. Enable FSPF GR.
3. Set the maximum FSPF GR
interval.
Configuring the GR helper
Step
1. Enter system view.
2. Enable FSPF GR helper.
Displaying and maintaining FC routing and
forwarding
Execute display commands in any view and reset commands in user view.
Task
Display FC routing table information.
Display FC FIB table information.
Display FC Exchange table information.
Display FSPF neighbor information.
Display link state database information.
Display FSPF GR state information.
Display FSPF statistics.
Clear FSPF statistics.
Command
system-view
fspf graceful-restart
fspf graceful-restart interval
interval-value
Command
system-view
fspf graceful-restart helper
Command
display fc routing-table [ vsan vsan-id ] [ statistics |
verbose ]
display fc routing-table vsan vsan-id fc-id [ mask |
mask-length ] [ verbose ]
display fc fib [ fcid [ mask-length ] ] vsan vsan-id
display fc exchange { link | protocol } [ slot slot-number ]
display fc exchange link verbose [ slot slot-number [ exid
exid ] ]
display fspf neighbor [ vsan vsan-id ]
display fspf lsdb [ vsan vsan-id ]
display fspf graceful-restart [ vsan vsan-id ]
display fspf statistics [ vsan vsan-id ]
reset fspf counters [ vsan vsan-id ]
60
Remarks
N/A
By default, FSPF GR is disabled.
The default setting is 120 seconds.
Remarks
N/A
By default, FSPF GR helper is
enabled.