Advertising A Default Route; Configuring Received/Redistributed Route Filtering; Setting A Preference For Ripng - HP HPE FlexNetwork 7500 series Configuration Manual

Step
2. Enter interface view.
3. Advertise a summary IPv6
prefix.

Advertising a default route

You can configure RIPng to advertise a default route with the specified cost to its neighbors.
To configure RIPng to advertise a default route:
Step
1. Enter system view.
2. Enter interface view.
3. Configure RIPng to advertise
a default route.

Configuring received/redistributed route filtering

Perform this task to filter received or redistributed routes by using an IPv6 ACL or IPv6 prefix list. You
can also configure RIPng to filter routes redistributed from other routing protocols and routes from a
specified neighbor.
To configure a RIPng route filtering policy:
Step
1. Enter system view.
2. Enter RIPng view.
3. Configure a filter policy
to filter received routes.
4. Configure a filter policy
to filter redistributed
routes.

Setting a preference for RIPng

Routing protocols each have a preference. When they find routes to the same destination, the route
found by the routing protocol with the highest preference is selected as the optimal route. You can
manually set a preference for RIPng. The smaller the value, the higher the preference.
To set a preference for RIPng:
Command
interface interface-type interface-number
ripng summary-address ipv6-address
prefix-length
Command
system-view
interface interface-type
interface-number
ripng default-route { only |
originate } [ cost cost-value |
route-policy
route-policy-name ] *
Command
system-view
ripng [ process-id ] [ vpn-instance
vpn-instance-name ]
filter-policy { ipv6-acl-number |
prefix-list prefix-list-name } import
filter-policy { ipv6-acl-number |
prefix-list prefix-list-name } export
[ protocol [ process-id ] ]
409
Remarks
N/A
By default, the
summary IPv6 prefix
is not configured.
Remarks
N/A
N/A
By default, RIPng does not advertise a
default route.
This command advertises a default
route on the current interface
regardless of whether the default
route exists in the local IPv6 routing
table.
Remarks
N/A
N/A
By default, RIPng does not filter
received routes.
By default, RIPng does not filter
redistributed routes.