HP HPE FlexNetwork 7500 series Configuration Manual page 255

Step
3. Configure BGP route
distribution filtering policies.
To configure BGP route distribution filtering policies (IPv6 unicast/multicast address family):
Step
1. Enter system view.
Command
•
Reference an ACL or IP
prefix list to filter advertised
BGP routes:
filter-policy
{ ipv4-acl-number |
prefix-list prefix-list-name }
export [ direct | isis
process-id | ospf process-id |
rip process-id | static ]
•
Reference a routing policy to
filter BGP routes advertised
to a peer or peer group:
peer { group-name |
ipv4-address
[ mask-length ] }
route-policy
route-policy-name export
•
Reference an ACL to filter
BGP routes advertised to a
peer or peer group:
peer { group-name |
ipv4-address
[ mask-length ] } filter-policy
ipv4-acl-number export
•
Reference an AS path list to
filter BGP routes advertised
to a peer or peer group:
peer { group-name |
ipv4-address
[ mask-length ] } as-path-acl
as-path-acl-number export
•
Reference an IPv4 prefix list
to filter BGP routes
advertised to a peer or peer
group:
peer { group-name |
ipv4-address
[ mask-length ] } prefix-list
prefix-list-name export
Command
system-view
243
Remarks
Use at least one method.
By default, no BGP distribution
filtering policy is configured.
Remarks
N/A