Download Print this page

HP 6125XLG Configuration Manual: Configuring Fspf Gr; Displaying And Maintaining Fc Routing And Forwarding

R2306-hp 6125xlg blade switch fcoe configuration guide.
Hide thumbs

Advertisement

Configuring FSPF GR

FSPF Graceful Restart (GR) enables nonstop forwarding of traffic by backing up FSPF configuration
information during a protocol restart (for example, the FSPF process restart triggered by the process
command) or active/standby switchover.
GR involves the following roles:
GR restarter—GR-capable device where a protocol restart or active/standby switchover occurs
GR helper—The GR restarter's neighboring device that assists in the GR process
Configuring the GR restarter
Step
1.
Enter system view.
2.
Enable FSPF GR.
3.
Configure the maximum interval
for FSPF GR.
Configuring the GR helper
Step
1.
Enter system view.
2.
Enable FSPF GR helper.
Displaying and maintaining FC routing and
forwarding
Execute display commands in any view.
Task
Display FC routing table information.
Display FC FIB table information.
Display FC Exchange table information
Display FSPF neighbor information.
Display link state database information.
Display FSPF GR state information.
Display FSPF statistics.
Command
system-view
fspf graceful-restart
fspf graceful-restart interval
interval-value
Command
system-view
fspf graceful-restart helper
Command
display fc routing-table [ vsan vsan-id ] [ statistics |
verbose ]
display fc routing-table vsan vsan-id fc-id [ mask |
mask-length ] [ verbose ]
display fc fib [ fcid [ mask-length ] ] vsan vsan-id
display fc exchange { link | protocol } [ slot slot-number ]
display fc exchange link verbose [ slot slot-number [ exid
exid ] ]
display fspf neighbor [ vsan vsan-id ]
display fspf lsdb [ vsan vsan-id ]
display fspf graceful-restart [ vsan vsan-id ]
display fspf statistics [ vsan vsan-id ]
62
Remarks
N/A
By default, FSPF GR is disabled.
The default setting is 120 seconds.
Remarks
N/A
By default, FSPF GR helper is
enabled.

Advertisement

   Related Manuals for HP 6125XLG

Comments to this Manuals

Symbols: 0
Latest comments: