HP HPE FlexNetwork 7500 series Configuration Manual page 300

Step
2. Enter BGP instance view or
BGP-VPN instance view.
3. Enable BGP route refresh for
a peer or peer group.
4. Return to user view.
5. Perform manual soft-reset.
To configure manual soft-reset (IPv6 unicast/multicast address family):
Step
1. Enter system view.
Command
•
Enter BGP instance view:
bgp as-number [ instance
instance-name ]
•
Enter BGP-VPN instance
view:
a. bgp as-number
[ instance
instance-name ]
b. ip vpn-instance
vpn-instance-name
•
Enable BGP route refresh for
the specified peer or peer
group:
peer { group-name |
ipv4-address
[ mask-length ] }
capability-advertise
route-refresh
•
Enable the BGP route
refresh, multi-protocol
extension, and 4-byte AS
number features for the
specified peer or peer group:
undo peer { group-name |
ipv4-address
[ mask-length ] }
capability-advertise
conventional
return
refresh bgp [ instance
instance-name ] { ipv4-address
[ mask-length ] | all | external |
group group-name | internal }
{ export | import } ipv4
{ multicast | [ unicast ]
[ vpn-instance
vpn-instance-name ] }
Command
system-view
288
Remarks
N/A
By default, the BGP route refresh,
multi-protocol extension, and
4-byte AS number features are
enabled.
N/A
N/A
Remarks
N/A