Table of Contents
Advertisement
Step
6.
Enable the router to
exchange IPv6 unicast
routing information with the
specified peer.
Configuring a BGP peer (IPv4 multicast address family)
Step
1.
Enter system view.
2.
Enter BGP instance view
3.
Create an IPv4 BGP peer
and specify its AS number.
4.
(Optional.) Configure a
description for the peer.
5.
Create the BGP IPv4
multicast address family and
enter its view.
6.
Enable the router to
exchange IPv4 unicast
routing information used for
RPF check with the specified
peer.
Configuring a BGP peer (IPv6 multicast address family)
Step
1.
Enter system view.
2.
Enter BGP instance view.
3.
Create an IPv6 BGP peer
and specify its AS number.
4.
(Optional.) Configure a
description for the peer.
5.
Create the BGP IPv6
multicast address family and
enter its view.
6.
Enable the router to
exchange IPv6 unicast
routing information used for
RPF check with the specified
peer.
Configuring dynamic BGP peers
This feature enables BGP to establish dynamic BGP peer relationships with devices in a network.
BGP accepts connection requests from the network but it does not initiate connection requests to the
network.
After a device in the network initiates a connection request, BGP establishes a dynamic peer
relationship with the device.
Command
peer ipv6-address enable
Command
system-view
bgp as-number [ instance
instance-name ]
peer ipv4-address as-number
as-number
peer ipv4-address description
text
address-family ipv4 multicast
peer ipv4-address enable
Command
system-view
bgp as-number [ instance
instance-name ]
peer ipv6-address as-number
as-number
peer ipv6-address description
text
address-family ipv6 multicast
peer ipv6-address enable
214
Remarks
By default, the router cannot
exchange IPv6 unicast routing
information with the peer.
Remarks
N/A
N/A
By default, no IPv4 BGP peers
exist.
By default, no description is
configured for a peer.
By default, no BGP IPv4 multicast
address family exists.
By default, the router cannot
exchange IPv4 unicast routing
information used for RPF check
with the peer.
Remarks
N/A
N/A
By default, no IPv6 BGP peers
exist.
By default, no description is
configured for a peer.
By default, no BGP IPv6 multicast
address family exist.
By default, the router cannot
exchange IPv6 unicast routing
information used for RPF check
with the peer.
Advertisement
Table of Contents
Troubleshooting
