Enabling Snmp Notifications For The Mac Address Table; Displaying And Maintaining The Mac Address Table - HP 6125XLG Configuration Manual

Enabling SNMP notifications for the MAC address table

After you enable SNMP notifications for the MAC address table, this feature will generate SNMP
notifications to notify the NMS of important events. This feature sends the SNMP notifications to the
SNMP module of the device. You can set the notification sending parameters in SNMP to determine the
attributes of sending notifications.
After you disable SNMP notifications for the MAC address table, the device will send log messages to the
information center module. You can set the output rules and destinations to examine the log messages of
the MAC address table module.
For more information about SNMP notifications and information center, see Network Management and
Monitoring Configuration Guide.
To enable SNMP notifications for the MAC address table:
Step
1. Enter system view.
Enable SNMP
2.
notifications for
the MAC address
table.

Displaying and maintaining the MAC address table

Execute display commands in any view.
Task
Display MAC address table
information.
Display the MAC address information
of the egress RB specified by its
nickname (see
Display the aging timer for dynamic
MAC address entries.
Display the system or interface MAC
address learning state.
Display MAC address statistics.
Display the MAC address moving
records
Command
system-view
snmp-agent trap enable mac-address
[ mac-move ]
Figure 6).
Command
display mac-address [ mac-address [ vlan vlan-id ] | [ [ dynamic |
static ] [ interface interface-type interface-number ] | blackhole |
multiport ] [ vlan vlan-id ] [ count ] ]
display mac-address nickname nickname
display mac-address aging-time
display mac-address mac-learning [ interface interface-type
interface-number ]
display mac-address statistics
display mac-address mac-move [ slot slot-number ]
30
Remarks
N/A
By default, SNMP notifications are
disabled for the MAC address
table.