HP HPE FlexNetwork 7500 series Configuration Manual page 274

Step
2. Enter BGP IPv4 unicast
address family view,
BGP-VPN IPv4 unicast
address family view, or BGP
IPv4 multicast address family
view.
3. Specify the router as the next
hop for routes sent to a peer
or peer group.
To configure the NEXT_HOP attribute (IPv6 unicast/multicast address family):
Step
1. Enter system view.
Command
•
Enter BGP IPv4 unicast
address family view:
a. bgp as-number
[ instance
instance-name ]
b. address-family ipv4
[ unicast ]
•
Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
[ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
•
Enter BGP IPv4 multicast
address family view:
f. bgp as-number
[ instance
instance-name ]
g. address-family ipv4
multicast
peer { group-name | ipv4-address
[ mask-length ] } next-hop-local
Command
system-view
262
Remarks
N/A
By default, the router sets itself as
the next hop for routes sent to an
EBGP peer or peer group.
However, it does not set itself as
the next hop for routes sent to an
IBGP peer or peer group.
Remarks
N/A