HP HPE FlexNetwork 7500 series Configuration Manual page 243

Step
2. Enter BGP IPv4 unicast
address family view,
BGP-VPN IPv4 unicast
address family view, or BGP
IPv4 multicast address family
view.
3. Enable route redistribution
from the specified IGP into
BGP.
4. (Optional.) Enable default
route redistribution into BGP.
To configure BGP to redistribute IGP routes (IPv6 unicast/multicast address family):
Step
1. Enter system view.
Command
•
Enter BGP IPv4 unicast
address family view:
a. bgp as-number
[ instance
instance-name ]
b. address-family ipv4
[ unicast ]
•
Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
[ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
•
Enter BGP IPv4 multicast
address family view:
f. bgp as-number
[ instance
instance-name ]
g. address-family ipv4
multicast
import-route protocol
[ { process-id | all-processes }
[ allow-direct | med med-value |
route-policy route-policy-name ]
* ]
default-route imported
Command
system-view
231
Remarks
N/A
By default, BGP does not
redistribute IGP routes.
By default, BGP does not
redistribute default routes.
Remarks
N/A