Placing Originals In The Feeder - Canon imageRunner 6020 Reference Manual Reference Manual

1

Placing Originals in the Feeder

Place a stack of originals into the feeder, and press
automatically feeds the originals onto the platen glass and scans them. Two-sided
originals can also be automatically scanned as two-sided documents.
You can place the following originals into the feeder's original supply tray:
•
Weight: One-sided scanning: 10 to 32 Ib bond (38 to 128 g/m
•
Size: 11" x 17", LGL, LTR, LTRR, STMT
• Tray capacity: 100 sheets (20 Ib bond (80 g/m
IMPORTANT
•
Do not place the following types of originals in the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals
- Carbon backed paper or other originals which might not feed smoothly
- Transparencies and other highly transparent originals
•
Check the condition of originals which have been fed through the feeder 30 times. (This
frequency differs depending upon the quality of the paper.) Originals which have been
fed through the feeder 30 times can become folded or wrinkled and might not feed
smoothly.
•
If the feeder rollers are dirty from scanning originals written in pencil, perform the feeder
cleaning procedure. (See "While Using the Feeder (Feeder Cleaning)," on p. 5-25.)
•
When placing folded originals, smooth out the folds first, then place them into the feeder.
1-60 Placing Originals
•
STMT and postcard size paper cannot be detected. Follow the instructions on the
touch panel display, and specify the original size or manually select the paper size.
Two-sided scanning: 13 to 32 Ib bond (50 to 128 g/m
(Start). The machine
)
2
2 )
))
2