How To Display And Manage Test Results; Data File Management; Using File And Test-Result Directories - Keithley 4200-SCS User Manual

Section 2: Model 4200-SCS Software Environment
Figure 2-14
Example project plan

How to display and manage test results

Data file management

Using file and test-result directories

KITE application files and test results are stored on the 4200-SCS hard drive by default. However,
KITE projects and various other KITE application files can be stored and used on any available
hard drive, except CD, CD-R, CD-RW drives and write-protected drives or directories.
NOTE
This subsection provides useful information regarding the default organization of KITE application
and data files. Additional information regarding KTE Interactive file management and system
administration is in the
CAUTION
2-24
Storing application files on a congested network drive can degrade overall test
sequence performance. The best Model 4200-SCS system performance is obtained
by storing all KTE Interactive application files on the Model 4200-SCS internal hard
drive. There, sweep and sampling measurement speed is not affected perceivably by
network traffic or any other embedded PC system activities.
Reference Manual, Managing multiple users and systems, page
Never directly edit KITE application files using a test editing program (with
one exception, noted in
because unexpected results and application crashes can occur.
Return to
How to create and add a new device on page
Section Topics
Model 4200-SCS User's Manual
10-4.
2-27)
4200-900-01 Rev. K / February 2017