Keithley 4200-SCS User Manual page 295

Model 4200-SCS User Manual
To set up KCON:
1.
2.
Figure 4-39
Adding a pulse generator
3.
Figure 4-40
Pulse generator configuration
4.
Figure 4-41
Adding a switch matrix
5.
4200-900-01 Rev. K / February 2017
Start KCON. Double-click the KCON icon or use the Start menu, Start > Programs >
Keithley > KCON.
Add the Hewlett Packard Model 8110A/81110A Pulse Generator to the system configuration
using the KCON Tools menu as illustrated in
Set the GPIB Address for the pulse generator by selecting it in the configuration navigator
and entering the appropriate GPIB Address on the Properties & Connections tab. This is
illustrated in Figure 4-40.
Add the Keithley Model 707/707A Switching Matrix to the system configuration using the
KCON Tools menu as illustrated in
Set the GPIB Address for the switch matrix and add the Model 7174A matrix card in Slot 1
as illustrated in Figure 4-42.
Return to
Section 4: How to Control Other Instruments with the Model 4200-SCS
Figure
Figure 4-41.
Section Topics
4-39.
4-29