Keithley 4200-SCS User Manual page 269

Model 4200-SCS User Manual
Figure 4-1
System configuration with external instruments
Model 4200-SCS
Internal instruments
Legend
RED = GPIB/IEEE-488
BLUE = RS-232
Green = Ethernet
User modules are used to access these communication interfaces and control external equipment.
User modules are stored in user libraries, which are created and maintained with the Keithley User
Library Tool (KULT). For information about creating and maintaining user libraries refer to the
Reference Manual, Advanced KULT features, page
To execute a KULT user module in Keithley Interactive Test Environment (KITE) create a KITE
user test module (UTM) and connect it to the user module. Once this user module is connected to
the UTM, the following occurs each time KITE executes the UTM:
4200-900-01 Rev. K / February 2017
Safety Interlock
• KITE dynamically loads the user module and the appropriate user library.
• KITE passes the user-module parameters stored in the UTM to the user module.
• Data generated by the user module is returned to the UTM for interactive analysis.
Return to
Section 4: How to Control Other Instruments with the Model 4200-SCS
External instruments
GPI1-8
General-purpose
test instruments
PGU1-16
Pulse generators
CMTR1-8
Capacitance meters
MTRX1
Switch matrix
Instrument
PRBR1
terminal
Probe station
connections
Probe
station
controller
TF1
Test fixture
8-39.
Section Topics
IEEE-488
or
RS-232
IEEE-488
IEEE-488
IEEE-488
Ethernet
or
IEEE-488
or
RS-232
Device
under
test
(DUT)
Test system
pins
4-3