Using The Utm Gui View - Keithley 4200-SCS User Manual

Model 4200-SCS User's Manual
an edit box, clicking on a drop-down list, or selecting a check box or option button. The UTM GUI
view simplifies the presentation of the UTM test parameters by not displaying some of the less-
used parameters. Entering a value in the GUI view also places the value into the table-based
classic definition; entering a value in the classic view also places it in the GUI view. If there is a
parameter in the table, but not in the GUI definition, then the table determines the value used by
the UTM.
Figure 2-5
UTM classic definition tab
Output Values button: Output Values button:
Click to set export Output Click to set export Output
Values for this test to the Values for this test to the
Subsite data sheet. Subsite data sheet.
Cell display edit box: Displays
contents of selected cell and
allows data entry.
Documentation area: Displays
important information about
the test module.
Workspace window tab:
e is
When workbook mod
enabled (per Reference
Manual, Specifying environment
), eac
preferences, page 6-338
Project-Plan component window
that is active in the KITE
workspace can be accessed
quickly by selecting its
Workspace window tab.
A UTM is created and configured by first selecting a user library and user module, and then
entering parameter values. For details about defining and configuring a UTM, refer to the
Reference Manual, Configuring the UTMs, page

Using the UTM GUI view

To understand the test, read the explanation of the test in the Test Description area (see
6 on page
parameters are available in the classic view. If a parameter's use is unclear, check if the parameter
has any hovertext help (position the mouse pointer over the parameter entry field). Additional
4200-900-01 Rev. K / February 2017
Sheet tab:
Numerical test and analysis results
and test settings.
Graph tab:
Formulator:
Graphical test
Mathematical
and analysis results.
test results
analysis tool.
h
Parameter identity cells:
Spreadsheet-like cells where the test-module
parameter names and data types are specified.
2-12). Note that the UTM GUI view will typically hide the less-used parameters; these
Return to
Section 2: Model 4200-SCS Software Environment
Status tab:
Test definition and
configuration status.
Test Notes tab:
Type in notes about
the project.
User libraries box:
Test library selection for the UTM.
6-142.
Section Topics
User modules box:
Test module selection for the UTM.
Parameter entry cells:
Spreadsheet-like cells where you enter test
parameter values.
Figure 2-
2-11