How To Perform A C-V Test On My Device; Kite Itm Configuration; Definition Tab; Terminal Settings - Keithley 4200-SCS User Manual

Model 4200-SCS User's Manual

How to perform a C-V test on my device

KITE ITM configuration

KITE is the graphical user interface used to configure and run interactive test
modules (ITMs). The workspace for KITE includes tabs for ITM configuration
(Definition tab) and tabs for evaluating test results (Sheet, Graph, and Status
tabs).
The following information explains how to configure an ITM that uses the 4210-
CVU. The ITMs provided by Keithley Instruments are documented in
manual, C-V project plans, page
NOTE

Definition tab

Terminal settings

In the project navigator, double-click an ITM to open the Definition tab.
3-10
terminal A is set for CVH1, terminal B will be set for CVL1.
Figure 3-10
Definition tab for an ITM
4200-900-01 Rev. K / February 2017
Details about KITE ITMs are provided in
Environment (KITE), page
supplemental and pertains specifically to the 4210-CVU to configure ITMs.
shows an example of a typical definition tab for a two-terminal device. When
ITM Timing window
Opens Forcing Functions /
Measure Options window
Return to
Section 3: Common Device Characterization Tests
15-28.
Reference manual, Keithley Interactive Test
6-1. The KITE ITM information provided here is
Drop-down menu for terminal A
Section Topics
Reference
Figure
3-13