Open The Project Plan Window; Test Descriptions - Keithley 4200-SCS User Manual

Section 4: How to Control Other Instruments with the Model 4200-SCS

Open the project plan window

In the project navigator, double-click probesubsites to open the project plan window. For this
tutorial, five sites on a wafer are to be tested. As shown in
follows and click the Apply button at the bottom right-hand corner of the window:
Enable ( √ ) Project Initialization Steps
1.
Enable ( √ ) Project Termination Steps
2.
3. Start Execution at Site: 1
4. Finish Execution at Site: 5
Figure 4-29
Modified project plan settings

Test descriptions

Test descriptions for the probesubsites project are provided in
the workspace by double-clicking them in the project navigator.
NOTE
4-22
The connect UTMs are used to control the switch matrix.
Return to Section Topics
Model 4200-SCS User Manual
Figure 4-29, set up the project plan as
Table 4-5. Tests can be opened in
4200-900-01 Rev. K / February 2017