Running The Test Sequence Test Data - Keithley 4200-SCS User Manual

Index
Symbols
"connect" parameters for "4terminal-n-fet" device
4-15
"cvsweep" UTM
"probesubsites" test descriptions
Numerics
4- terminal n-MOSFET tests
4200-SCS Hardware Overview
59283
Heading Level 3
72968
Heading Level 4
A
Acquisition sample rate
Add a Device Plan
Add a new Device Plan to a KITE project
Add a new Subsite Plan
Add a new Subsite Plan to a KITE project
Add a switch card to the system configuration
Add a switch matrix to the system configuration
Add a test fixture to the system configuration
Add the "cvsweep" UTM
Adding a Keithley 590 CV Analyzer to the system
configuration
Adding a probe station
Adding a pulse generator
Adding a switch matrix
Advanced Connections
B
Basic
ground unit characteristics
SMU source-measure configuration
SMU/PreAmp source-measure configuration
1-14
Basic test execution
Boot the system and log in
Buttons to close or reduce size of test documents
4-35
C
Calculate functions
Changing KITE startup behavior
Chassis ground
Clear Append Data method for deleting Append
worksheets
Compensation
Configuration
ITMs
Configuring the switch matrix
Connect SMUs to N-channel MOSFET
Connect SMUs to NPN transistor
connect test
Connecting Devices Under Test (DUTs)
4200-900-01 Rev. K / February 2017
.................................................. 4-43
........................ 4-23
................................. 3-5
.......................... 1-10
Average equivalent time points
2.4.1.5 Project Plan ............................ 2-22
...................................... 1-30
.............................................. 4-41
..................................... 4-41
..................................... 4-42
............................................... 4-38
.............................4-20
................................... 4-29
.............................4-19
...................................... 1-37
......................... 1-32
........................................... 2-21
................................. 1-38
............................................. 1-31
........................ 3-12
.................................................. 1-35
................................................. 2-38
.................................................... 3-20
........................................................... 2-17
...................4-19
.............. 4-24
....................... 4-24
........................................................ 4-14
.....
.......... 1-31
.......... 4-41
......... 4-40
... 4-10
.. 4-9
...... 4-9
,
4-30
,
4-29
........... 1-11
....
....
D
,
4-30
............ 1-36
Model 4200-SCS User's Manual
Connecting the switch matrix
Connections ......................................................... 3-9
Contents of the Keithley Device file new-mosfet.kdv
2-28
Controlling a CV Analyzer .................................. 4-37
Add a Device Plan ..................................... 4-41
Add a Subsite Plan .................................... 4-40
Add a UTM ................................................. 4-42
Connections ............................................... 4-38
Create a new project .................................. 4-39
KCON setup ............................................... 4-38
Modifying the "cvsweep" UTM
Controlling a probe station
KCON setup ............................................... 4-19
Open the "probesubsites" project
Open the project plan window
Probe station configuration
Prober control overview
Running the test sequence
Test data .................................................... 4-26
Test descriptions ........................................ 4-22
Test system connections
Controlling a pulse generator
Compare the test results
Overlaying graphs .............................. 4-36
Description of tests .................................... 4-32
"pgu1-init" test .................................... 4-33
"pgu1-setup" test ................................ 4-34
"pgu-trigger" test ................................ 4-34
First "connect" test
First "id-vg" test .................................. 4-32
Second "connect" test
Second "id-vg" test
Third "connect" test
KCON setup ............................................... 4-28
Open the "ivpgswitch" project
Running the test sequence
Test system connections
Controlling a switch matrix
"connect" test description
Running test sequences
Controlling external equipment overview
Copying entire KITE project ............................... 3-10
Copying individual tests using the test library manager
.................................................................... 3-11
CVU Frequency Sweep (bias)
CVU Frequency Sweep (step)
CVU Voltage Bias .............................................. 3-21
CVU Voltage List Sweep .................................... 3-23
CVU Voltage Sweep .......................................... 3-22
Data Save As window ........................................ 2-36
Data worksheet of a Sheet tab containing both data
and Formulator results ............................... 2-33
Data worksheet of a Sheet tab containing data for
multiple sweeps ......................................... 2-33
Data-source identifier ......................................... 2-35
DC Preamp ........................................................ 1-14
Index
,
................... 4-20 4-31
.
................... 4-43
.............. 4-21
................... 4-22
........................ 4-21
............................. 4-16
........................ 4-25
........................... 4-18
............................ 4-35
............................. 4-32
........................ 4-33
............................. 4-34
............................ 4-34
.................... 4-31
........................ 4-35
........................... 4-28
........................... 4-14
............................ 4-12
............. 4-2
........................... 3-24
........................... 3-26
Index-1