Ntcpu Network Setup; Description - NEC Aspire Series Networking Manual

10-12 : NTCPU Network Setup

Level:
SA

Description

Input Data
Item
Item
No.
01 IP Address 1.0.0.1 ~ 126.255.255.254
128.1.0.1 -191.254.255.254
192.0.1.1 ~ 223.255.254.254
02 Subnet 128.0.0.0
Mask 240.0.0.0
254.0.0.0
255.192.0.0
255.252.0.0
255.255.128.0
255.255.248.0
255.255.255.0
255.255.255.224
255.255.255.252
03 Default 1.0.0.1 ~ 126.255.255.254
Gateway 128.1.0.1 ~ 191.254.255.254
192.0.1.1 ~ 223.255.254.254
04 Time Zone -12 thru +12 Hours
05 NIC 0 = Auto Detect
1 = 100Mbps, Full Duplex
2 = 100Mbps, Half Duplex
3 = 10Mbps, Full Duplex
4 = 10Mbps, Half Duplex
Networking
Aspire S
• Available.
• Applicable to IP Networking.
Use Program 10-12 : NTCPU Network Setup to setup the IP Address, Subnet-Mask, and Default
Gateway addresses.
Input Data
192.0.0.0
248.0.0.0
255.0.0.0
255.224.0.0
255.254.0.0
255.255.192.0
255.255.252.0
255.255.255.128
255.255.255.240
255.255.255.254
10-12 : NTCPU Network Setup
• Available.
• Applicable to IP Networking.
Default
172.16.0.10
224.0.0.0 255.255.0.0
252.0.0.0
255.128.0.0
255.248.0.0
255.255.0.0
255.255.224.0
255.255.254.0
255.255.255.192
255.255.255.248
255.255.255.255
0.0.0.0
+9 Hours
0
Programming
Aspire M/L/XL
Conditions
The setting of Sub-
net-Mask is mistaken
when all Host Address
are 0.
If the network section
is:
0,
127
128.0
191.255
192.0.0
223.255.255
The setting of Sub-
net-Mask is mistaken.
IP Address for Router
Enter the difference for
standard time.
NIC Auto Negotiate
◆ 119