Performing An Acquisition From Results Page - JDS Uniphase 4100 User Manual

Chapter 5 Launching a reflectometry test and displaying results
Performing OTDR acquisitions
Performing an
acquisition
from Results
page
42
Once the results page is displayed, you can perform a new acquisition
modifying the main acquisition parameters.
Before launching a new OTDR acquisition, make sure the
trace(s) displayed have been previously saved if necessary, as
the new acquisition will automatically delete the displayed
results.
1
On Results page, press
In OTDR Expert mode, the acquisition parameters that can be modi-
fied displays under the results trace.
In SmartOTDR™ mode, the Setup screen displays (see
on page 19).
Fig. 20
Results page and Quick Setup menu (OTDR Expert)
2
Modify the acquisition parameters wished in the displayed menu:
– In OTDR Expert mode: Laser / Acquisition / Range / Pulse /
Time
See page 21
– In SmartOTDR™ mode: Laser / Fiber Number / Distance unit
See page 18.
3 Once configured, launch the new OTDR test pressing the S
S
TOP hard key.
Press again Mini Setup menu key to hide the menu under the trace.
User Manual 770000102/08
Quick Setup
and page 22.
softkey
Figure 10
/
TART