Technical Specifications Of The Source Function On Module - JDS Uniphase 4100 User Manual

Plug-ins Single /
Multi mode
Measurement
Wavelength
Calibrated Wavelength
Accuracy at calibrated
wavelengths
Input power range
Maximum resolution
Linearity within the
specification range
a. Using a mode conditioner

Technical specifications of the Source function on module

Technical specifications of the Source function on module

Power meter option for Multi/Single mode Modules
Singlemode Power meter
1310 / 1490 / 1550 / 1625 / 1650 nm
1310 / 1490 / 1550 / 1625 / 1650 nm
± 0.5 dB (at -30 dBm)
- 50 to - 2 dBm
± 0.5 dB (- 45 to - 5 dBm)
– Laser Class 1
– Wavelength lasers at 25°C, depending on the wavelengths available
in the module:
– 850 ± 20 nm
– 1300 ± 30 nm
– 1310 ± 20 nm
– 1490 ± 20 nm
– 1550 ± 20 nm
– 1625 ± 20 nm
– 1650 ± 20 nm
The wavelengths available for the source are the same as those
available for the OTDR module.
– Spectral bandwidth: 5 nm RMS typical
Output level
– - 3.5 dBm typical for continuous signal (CW)
– modulated mean level: - 6.5 dBm typical
Emission mode
– Continuous signal (CW), not available for the 1650 nm wavelength
on the MP OTDR Module.
User Manual 770000102/08
Chapter 10 Technical specifications
Multimode Power meter
± 1 dB (at -15 dBm)
0.01 dB / 0.01nW
850 and 1300 nm
850 and 1300 nm
a
- 30 to -3 dBm
-
149