Table of Contents
Advertisement
Chapter 8 FiberComplete Modules
Configuring the units
Saving the
parameters
from
FiberComplete
configuration
Loading a
configuration
file
FiberComplete
116
Once the OTDR and FCOMP File and Measurement parameters are
configured, it can be saved in a configuration file.
This configuration file can then be recalled for future acquisition in Fiber-
Complete mode.
To save parameters in a configuration file:
1
If File page is displayed, press
2
Press menu key
An edition keypad displays
3
Enter a name for the configuration file.
Directory into which
file will be saved
Fig. 74
Save Configuration file - Edition keypad
NOTE
Configuration file is saved in the current directory, the last one used.
1
Press Enter to validate
The configuration file is saved with the extension «fo_cfg» (icon
NOTE
The FiberComplete configuration file includes data storage and
measurement settings of FCOMP and SM_OTDR. This configuration
file can be shared and reused with other units.
FiberComplete configuration file includes OTDR and FCOMP setup and
file parameters.
To load a configuration file previously created and apply parameters to
new tests:
User Manual
770000102/08
S
to return to Setup page.
ETUP
.
).
Advertisement
Table of Contents
