Viewing Test Results - JDS Uniphase HST-3000 User Manual

Viewing test results

The following procedure describes how to view test results.
To view test results
1 Configure and run a test:
– See "Monitoring a channel" on page 18
– See "Terminate testing" on page 27
– See "Pulse shape analysis" on page 34
– See "Drop and insert testing" on page 35
– See "Line loopback testing" on page 38
2 Press the Home navigation key.
3 Press the Display soft key.
The test categories appear.
4 Select a category.
Test results for the selected category appear. For descrip-
tions of test results, see
page 119.
NOTE:
Ending a test (by either stopping or upon completion of a
timed test) freezes all results.
The Sync and Data LEDs are still real-time.
HST-3000 E1 Testing User's Guide
Chapter 2 E1 testing
Appendix A beginning on

Viewing test results

39