Table of Contents
Advertisement
Saving
configuration
parameters in a
file
Table 5
File configuration in Test Auto mode
Auto Store: Yes
Change Fiber Nbr: Increment
Once File and Measurement parameters have been configured, those
parameters can be kept in memory and saved in a configuration file.
This configuration file can then be recalled in two cases:
–
in order to be applied when acquisition in SmartOTDR™ mode is
performed.
–
in order to be recalled for future acquisition in OTDR Expert
To save parameters in a configuration file:
1
If necessary, press
2
Select one parameter in one of the setup page (acquisition, link..)
3
Press menu key
An edition keypad displays
4
Enter a name for the configuration file.
NOTE
Configuration file is saved by default in the directory disk/config.
Directory into
which file will
be saved
Fig. 15
Save Configuration file - Edition keypad
5
Press Enter to validate
The configuration file is saved with the extension .fo_cfg (icon
User Manual
770000102/08
Chapter 4 Configuring the reflectometry test
Configuring the test in OTDR Expert
S
to return to Setup page.
ETUP
.
).
33
Advertisement
Table of Contents
