Results display
Chapter 5 Launching a reflectometry test and displaying results
Performing measurements during acquisition (Real Time mode
only)
The real time mode allows to make Loss, ORL or Reflectance measure-
ment using the A & B cursors and the key Loss / ORL / Reflect.:
1
Position A & B cursors on the trace
2
Click as many times as necessary on key
measurement between A & B cursors.
Fig. 22
Example of loss measurement
The traces acquired or recalled from a memory are displayed on the
Results page. According to the mode of acquisition (OTDR Expert or
SmartOTDR™), the results page offers similar functions, but also
different functions.
Fig. 23
Example of results trace with SmartOTDR™
User Manual
770000102/08
Results display
to get the
45