Chapter 7 Power meter and Source options of the OTDR Modules
Connection to the power meter
Connection to the power meter
Configuring the Power meter
92
Connector
Fig. 57
Optical connector for the Powermeter or Source on
the OTDR Module
The type of optical connector used for the power meter is the same as
the OTDR port.
With a module with 2 OTDR ports, select the port of connection
according to the wavelength available at each port (a label gives informa-
tion at the back of the OTDR module).
It is not possible to use simultaneously the Source function and
the Powermeter function, when both options are set onto the
OTDR module, as they use the same connector.
The power meter function is an option chosen at the time of order and
incorporated into the OTDR module in the factory.
To activate the function:
H
1
OME
Press the
2
Select the power meter icon in the section of the OTDR Module
The icon turns yellow
The effect of this action will to be to bring the power meter into use.
CAUTION
The Powermeter icons of the singlemode port and the one of the Mul-
timode port cannot be selected at the same time. When one is
selected, it automatically deselects the other one.
User Manual
770000102/08
button
.