Table of Contents
Advertisement
Chapter 9 File management
File Setup menu
Rules for naming
files (Filenaming
parameter)
File parameters
Cable Id = Cable A
Fiber number = 1
130
In the name of the file, it is possible to program automatic inclusion of
parameters such as the name of the fiber, identifiers (of the cable, its
origin, its end) or the measurement parameters (direction, resolution,
wavelength, pulse length...).
The Filenaming line shows the current filenaming rules and can be used
to modify them.
To edit or modify these rules:
1
Filenaming
Go to the
2
Press
to call up the edit menu
3
Select the desired characters and parameters
4
Enter
Select
or
the modifications are to be applied or not).
Fig. 87
Editing filenaming parameters
Default Filename
The key
selected, and allows to apply the file default name to the trace opened.
Example of filenaming:
Filenaming rules selected
ABC_[Cable_Id]Fiber-[Fiber_Num]
Default Filename for FCOMP results
Filenaming convention in Fiber View
In Fiber View, the filenaming convention is as follows:
[Fiber_Id][Fiber_Num]
User Manual
770000102/08
line
Cancel
to quit the edit screen (according to whether
is displayed when the line
Pre-defined
parameters
(FCOMP files)
Filenaming
is
Filename obtained
ABC_CableA_Fiber-1
Advertisement
Table of Contents
