Chapter 8 FiberComplete Modules
Saving results and generating a report
Saving results and generating a report
Saving results
and creating a
report from
results page
122
NOTE
In bidirectional mode:
- The OTDR results trace for acquisition performed from Location A to
Location B is stored on the primary unit (Location A)
- The OTDR results trace for acquisition performed from Location B to
Location A is stored on the secondary unit (Location B).
Once the results page is displayed, the results can be saved and a report
can be generated directly from the results screen.
Saving and report can have been automatically generated if, in the file
configuration, the Auto Store parameter has been set to Yes (see
131) with the appropriate Save Mode.
page
To generate a report:
1
Press Fast Report soft key
A menu displays under the trace.
2
In the menu, configure the file saving mode (and the report)
Fig. 82
Fast report configuration
a
In the Save Mode parameter, select:
File Only to save exclusively the results in a blts file
File + txt to save the results in a blts file and to generate a txt file
of the results
File + pdf to save the results in a blts file and to generate a report
in a pdf file
b
In the Cable Id parameter, enter/modify the name of the Cable
using the edition keypad.
c
Configure the parameter Fiber Number using the key
User Manual
770000102/08
.
.