Load With Configuration; Exporting Files; Explorer/Link Manager - JDS Uniphase 4100 User Manual

Chapter 9 File management
Explorer Function
Load with
configuration

Exporting files

Explorer/Link
Manager
138
Load Trace + Config
The key
uration recorded in the file. Thus the zooms, cursors and parameters
present at the time of acquisition will be used for the display.
This function also enables to recall and set the parameters defined in the
screens corresponding respectively to the
Click on the Export menu key allows to display a sub-menu from which
selected files can be:
– generated into one/several reports
– merged into one file (for txt/pdf files only)
– sent by e-mail
Before exporting file(s), the display can be modified, and the Link
Manager can be selected instead of the Explorer using the Explorer/
Link Mgr menu key.
The Link Manager function allows to display the explorer with all the link
information exclusively for the active application (the function must be
activated in Home page, or at least one result trace must be opened to
get the tab and display files in the Link Manager page).
For example, if the Link Mgr. function is selected in the tab OTDR, only
the link information from the OTDR files will be displayed (wether in multi-
mode or singlemode).
Select Link Mgr with the menu key Explorer/Link Mgr. to display the
corresponding files for the active tab.
Explorer View
Fig. 90
Explorer and Link Manager display
User Manual 770000102/08
will display the traces, recalling the config-
F
ILE
and
Link Manager View
Tab
selected
S
ETUP
keys.