Table of Contents
Advertisement
Chapter 5 Launching a reflectometry test and displaying results
Saving the trace(s) and generating a report
Opening a
report
72
–
If in the File Setup page (S
is defined with All Traces, one single .msor file and one single txt/
pdf report will be generated, bringing together all traces.
Example: if 3 traces are displayed in overlay, one single .msor file
and one single txt/pdf file (with one trace per page; except if the
results table is too long for one page) will be saved.
1
To open the report, press F
2
In the Explorer page, in the directory selected, select the file/report.
The file name is:
For the txt file: trace file_sor.txt
For the pdf file: trace file.sor.pdf
3
Press Load.
The file opens on the T-BERD/MTS.
Fig. 44
PDF report
User Manual
770000102/08
> File), the parameter File Content
ETUP
ILE
hardkey
Advertisement
Table of Contents
