SLM (Smart Link Mapper) option
Zone 1
Zone 2
Zone 3
Chapter 5 Launching a reflectometry test and displaying results
The SLM function is delivered as a licence, available on option with the
T-BERD/MTS.
It is usable with OTDR trace exclusively and can be used either with a
trace just acquired or with OTDR trace(s) saved onto the equipment.
Once the installation of the licence is completed (see Base-Unit manual):
1
Return to the result trace pressing
OTDR file from the Explorer).
The Trace/Summary menu key is replace by the Trace/SmartLink
menu key.
2
Click on this menu key to select SmartLink.
A screen as the following one is displayed:
Fig. 36
SmartLink function
The screen is divided into three zones:
Zone 1: Graphical representation of the link, with icons symbolizing
–
the different events detected.
Zone 2: Link Table, which gives a summary of results for each
–
wavelength, with results within/without thresholds in green/red
(according to Alarm thresholds defined in the setup screen).
Zone 3: Alarms table (if any)
–
User Manual
770000102/08
SLM (Smart Link Mapper) option
R
ESULTS
hard key (or load an
65