Table of Contents
Advertisement
Chapter 6 FTTA-SLM Software option
Results page
Results page
Trace View
84
1
In the S
menu, check in Laser line, that
ETUP
selected or select
2
Start the acquisition by pressing the S
3
Once the acquisition for the first wavelength is finished or to stop it
manually, click on Stop Wavelength. This allows to automatically
start the measurement for the following one.
A beep is emitted once the acquisitions on all lasers are completed.
The different traces appear in the same window and can be managed as
traces in overlay (see
The trace(s) acquired or recalled from a memory is/are displayed on the
Results page.
The Trace view is displayed by default once OTDR acquisition is
completed.
Fig. 50
FTTA OTDR Trace
Once trace is displayed, you can:
–
Zoom on trace (see
–
Set Cursor A and/or Cursor B (see
–
Launch a report of results (see
a report" on page
Press S
ETUP
hard key to go back to FTTA Setup screen and modify the
parameters before launching a new acquisition.
User Manual
770000102/08
All.
"Overlay trace function" on page
"Zoom function" on page
"Cursors" on page
"Saving the trace(s) and generating
87)
several lasers are
/S
TART
TOP
button.
61).
50).
49).
Advertisement
Table of Contents
