Xconfiguration Cameras Camera [1] Brightness Defaultlevel; Xconfiguration Cameras Camera [1] Flip; Xconfiguration Cameras Camera [1] Focus Mode; Xconfiguration Cameras Camera [1] Mirror - Cisco TelePresence SX10 Reference Manual

Application programming interface (api)
Hide thumbs Also See for TelePresence SX10:
Table of Contents

Advertisement

Cisco TelePresence SX10
Introduction

xConfiguration Cameras Camera [1] Brightness DefaultLevel

Define the brightness level. Requires the Cameras Camera [n] Brightness Mode to be set to
Manual.
Requires user role: ADMIN, USER
Default value: 20
USAGE:
xConfiguration Cameras Camera
n
where
n
: Unique ID that identifies the camera. Range: 1..1
DefaultLevel
: Integer (1..31)
The brightness level.

xConfiguration Cameras Camera [1] Flip

With Flip mode (vertical flip) you can flip the image upside down. Flipping applies both to the
self-view and the video that is transmitted to the far end.
Requires user role: ADMIN, USER
Default value: Auto
USAGE:
xConfiguration Cameras Camera
n
where
n
: Unique ID that identifies the camera. Range: 1..1
Flip
: Auto
Auto: If the camera detects that it is mounted upside down, the image is automatically
flipped.
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API
xConfiguration
xConfiguration
Brightness DefaultLevel:
DefaultLevel
Flip:
Flip
xCommand

xConfiguration Cameras Camera [1] Focus Mode

Define the camera focus mode.
Requires user role: ADMIN, USER
Default value: Auto
USAGE:
xConfiguration Cameras Camera
where
n
: Unique ID that identifies the camera. Range: 1..1
Mode
: Auto/Manual
Auto: The camera will auto focus once a call is connected, as well as after moving the
camera (pan, tilt, zoom). The system will use auto focus only for a few seconds to set
the right focus; then auto focus is turned off to prevent continuous focus adjustments of
the camera.
Manual: Turn the autofocus off and adjust the camera focus manually.

xConfiguration Cameras Camera [1] Mirror

With Mirror mode (horizontal flip) you can mirror the image on screen. Mirroring applies both to
the self-view and the video that is transmitted to the far end
Requires user role: ADMIN, USER
Default value: Auto
USAGE:
xConfiguration Cameras Camera
where
n
: Unique ID that identifies the camera. Range: 1..1
Mirror
: Auto/Off/On
Auto: If the camera detects that it is mounted upside down, the image is automatically
mirrored. If the camera cannot auto-detect whether it is mounted upside down or not,
the image is not changed.
Off: Display the image as other people see you.
On: Display the image as you see yourself in a mirror.
51
API Reference Guide
xStatus
Appendices
n
Focus Mode:
Mode
n
Mirror:
Mirror
Copyright © 2016 Cisco Systems, Inc. All rights reserved.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence sx80

Table of Contents