Replacing The Printer Paper Supply - Welch Allyn 53000 Directions For Use Manual

68 Chapter 5 Reviewing Patient Data

Replacing the Printer Paper Supply

Note
To replace the printer paper supply, follow these steps.
1. Press
2. Insert a new roll of paper.
Note
3. Thread the end of the roll over the roller and through the slot in the printer door, as
shown.
4. With one hand, pull lightly on the paper to take up any slack. With the other hand,
close the printer door by pushing it down and into place until it clicks.
Note
Use only the thermal paper (part number 7052-25) supplied by Welch Allyn. The
use of any other paper can result in poor printer performance.
to open the printer door.
The paper roll must be installed as shown in the illustration below. If the paper roll
is not installed correctly, the printer will not print.
Be certain that the paper does not catch in the printer door.
Welch Allyn Vital Signs Monitor 300 Series