CEStronics OMEGA ACTIVE IES Fitting And Operating Instructions page 34

Fitting

Danger of injury when handling the
punched metal pieces.


The IES cannot be used on locks with split
follower (hub).
6.1.2 Check length of the locking cylinder
Before fitting, satisfy yourself that the locking
cylinder has the correct length for the door lock by

measuring the distance by which the locking
cylinder projects from the door.

Example:
18.5 mm + thickness of the door + 18,5 mm =
minimum length of the locking cylinder
To ensure that you receive the correct set of
screws, you will have to state the thickness of your

door already when ordering the IES.
Page 34 of 128
CAUTION
Wear protective gloves as required.
NOTICE
Use the drawing below to find the correct
dimensions.
OMEGA ACTIVE IES