CEStronics OMEGA ACTIVE IES Fitting And Operating Instructions page 11

 When fitting the IES, make sure that the lock and the door
are in perfect condition. Malfunctions of the lock may impair
the functioning of the IES.
 The IES may not be used for locks with split follower (hub).
 Special regulations apply to approved doors. Before drilling
any holes into or through the door, satisfy yourself that the
use of the IES is permitted for doors of that type.
 In case of doors in escape or rescue routes, satisfy yourself
that the lock and the IES are suitable for the equipment of
the door.
 Make sure that the IES can be fitted without jamming and
without using force. If that is not possible, align the lock
and the IES so as to prevent jamming and bending of the
IES during its installation.
 Do not use any lubricants or oils for the IES.
 Do not drop the IES on the floor, on hard surfaces or on
hard objects.
 Protect the electronic components of the IES against water
and other liquids.
 The IES contains highly sensitive electronic parts that may
be damaged or destroyed through static charges. Do not
disassemble the IES in rooms with built up static charge.
 Do not store the IES without inserting a charged battery.
OMEGA ACTIVE IES
For your safety
Page 11 of 128