CEStronics OMEGA ACTIVE IES Fitting And Operating Instructions page 99

NOTICE

The battery, the case of the electronics module,
or the electronics may be damaged if you try to
pry out the batteries with an object.
Only use your hands to remove the batteries.

Never use any objects for this purpose.

The batteries are located in the inside plate. To replace the
batteries, you must first remove the inside shield.
Proceed as follows:
1.
Fig. 132 – Release the inside shield
2.
Fig. 133 – Lift the inside shield
OMEGA ACTIVE IES
Replacing the batteries of the IES
Release the M3 screw

(1) at the bottom of
the inside shield.
Carefully lift the

inside shield off the
inside plate.
For broad shield design
only:
Make sure that the

distance piece for the
screw remains fixed
in the inside shield.
Page 99 of 128